Showing 19–27 of 70 results

  • AM Modulation Monitor

    Features Remotely tune AM band, read metering, peak flashers. Tuning Range: 520kHz to 1720kHz in 10kHz steps; 522kHz to 1719kHz in 9kHz steps. Graphic 5-inch touch-screen and remote display of all level metering. Station Rotation for `round robin´ monitoring of up to 30 preset stations. Remote control and monitoring via Web. Enhanced alarm logging with notifications via Email/SMS & SNMP. Remote listening with multi-user stream and Dante/AES67 AoIP. Specifications PLEASE NOTE: Specifications tabulated here are actual, real-world measurements, not optimistic allusions to theoretical ideals. Measurement results should be repeatable when using the appropriate, laboratory-grade test equipment. RF & RECEPTION: Tuning Range: Tunes: 530kHz-1710kHz in 100kHz steps or 531kHz-1701kHz in 9kHz steps. Antenna Input: 50Ω/75Ω (F), 1Vrms max. High-Level RF Input: Two selectable 50-ohm (BNC) inputs for day/night scheduling, 5Vrms max. Off-Air Sensitivity (for 50dB monaural SNR): For 50dB SNR, 5dBµV or better with 10kHz audio bandwidth and NRSC de-emphasis; 15dBµV or better with 15kHz bandwidth, no de-emphasis. Frequency Response: ±0.25dB, 20Hz-15kHz in full-bandwidth mode. Distortion (at 99% modulation): <0.01% THD+N; <0.02% IMD (SMPTE, 60Hz/7kHz, 4:1). De-emphasis: NRSC ‘truncated’ 75µs (defeatable). Audio Cutoff Filter: Nth-order low-pass in audio monitor outputs only, programmable between 15kHz and 2kHz in 1kHz steps. OUTPUTS AND PORTS: Program Audio Outputs: Monaural program audio is delivered to ‘Left’ and ‘Right’ outputs for convenience in audio monitoring. The 526 does not support AM-stereo broadcasting. NOTE: Levels noted apply to symmetrical, ±100% carrier modulation. Consider headroom allowances for +125% program peaks. Balanced Analog: (XLR) Outputs 1 and 2 (‘L/R’) are adjustable from –15dBu to +15dBu in 0.1dB steps; 200Ω resistive source. AES Digital: (XLR) Adjustable from –30dBFS to 0dBFS in 0.1dB steps; user-selected 44.1kHz or 48kHz sample rate; 110Ω transformer-coupled. Dante/AES67 Compatible AoIP Port: (RJ45) Output at 44.1kHz (Dante-only) or 44.1kHz/48kHz (Dante/AES67). The AoIP utility has independent IP, Audio Format and Transmit Flow settings; level adjustable from –30dBFS to 0dBFS in 0.1dB steps. UDP Stream: ADTS or ADTS in MPEG-TS transport. HTTP/Icecast ‘Casual’ Listening Stream: Web browser remote-listening stream employs HE-AACv2 encoding, 44.1kHz or 48kHz sample rate, bit-rates from 18kbps to 64kbps; accommodates up to 10 simultaneous listeners. HTTP/Icecast and raw UDP streams are available simultaneously. Program Audio Outputs (continued): Headphone Jack: (¼” TRS) Menu-adjustable listening level. LAN Port: (RJ45) LAN connection to local network or Internet provides remote monitoring, control, listening and full SNMP implementation; user-programmable network setup and streaming parameters. General Purpose I/Os (Plug-In Barrier Strip): Inputs: GPIs are ground-seeking logic inputs with internal pull-up to +5Vdc. Programmable to accept momentary or sustained ground to switch functions. Outputs: Individual open-collector NPN transistor closures to ground are associated with alarm alerts. Each is programmable for GPO assignment and logic polarity. Outputs sink 100mA, 40VDC max. DISPLAYS AND DISPLAY OPTIONS: Bargraph & Numerical Level Metering: Positive and Negative Carrier Modulation (+150%/ –100%) • Demodulated Monaural Audio (dB) • BS.1770 Loudness (LU) • RF SNR (%) Graphic Displays and History Plots: IF Spectrum • Audio Spectrum • IF/Demod Oscilloscope • Modulation History • RF Metrics History • Loudness History • Audio History • BandScanner. TIMEKEEPING, SCHEDULER AND ALARMS: Real-Time Clock: Auto-sets to Internet time; auto/manual DST setting; battery backup. **Day/Night Scheduler: ** Webpage setup utility with link to FCC Sunrise & Sunset Calculator for automatic switchover, or GPI closure to ground for D/N operation. **Local & Remote Alarms: ** Positive Overmod • Negative Overmod • Audio Loss • Low Signal (Day) • Low Signal (Night). NOTE: Alarms have multiple parameter settings. All alarms can send text or email notifications. Alarms are automatically logged daily, weekly and monthly. POWER, ENVIRONMENTAL, MISCELLANEOUS Power Requirements 88-264VAC, Single-Phase; 12W. Size and Weight 3½”H x 19”W x 9”D; 10 lbs. (shipping weight) Operating Environmental 32°F/0°C-122°F/50°C; 0%-95% non-condensing relative humidity; 10,000ft/3048m. Conformances CE: EN50081-1 / EN50082-1, 93/68/EEC RoHS: 2002/95/EC. Direct Buy:- https://www.inovonicsbroadcast.com/product/526

    Read moreDone

  • Argo M

    Argo M comes in two space-saving sizes and uses the same flexible touchscreen panels as the Argo Q and Argo S. With everything in arms reach, Argo M’s compact and configurable surface provides immediate access to every parameter, control and setting with two fully featured and assignable rotary controls assigned to every fader.

    Direct BuyDone

  • Argo Q

    We’ve squeezed everything into Argo Q for the ultimate hands-on mixing experience. With dual faders and double the physical controls of the smaller Argo S, there is no better control surface for flagship entertainment and sport productions.

    Direct BuyDone

  • Argo S

    Compact enough to fit into the most challenging spaces, but with enough hands-on access to deliver physical control over every parameter of the audio mix, Argo S is designed to adapt to your needs without compromising control.

    Direct BuyDone

  • Audio Selectors 8/16 inputs

    Audio Selectors 8/16 stereo balanced inputs to dual stereo balanced outputs Altair introduces tho new “Audio Selector Series”, consisting of 2 different models with 16 or 8 balanced stereo inputs and 2 parallelled balanced stereo outputs. Due to the huge number of I/O, connections are made by PHOENIX (TM) type terminal blocks. “AS” Audio Selectors were designed under broadcasting specifications, with a removable front panel unit that allows separate installation of the main unit and the front panel for a more convenient use. Volume and Balance controls by rotary encoder and position indicators, allow precise and repeatable adjustments and other actions such as individual input TRIM and instant memory recall after starting the unit. Channel selection and MUTE functions are made under a proprietary fade in/out technique reducing notably all type of switching artefacts in order to obtain a clean channel transition or a progressive muting. The selectors incorporates a selectable automatic AUTO selection mode. When active, simplifies the selection by reducing the number of operations to the simple start/stop of the source needed. Below: 2 x AS-161 installed in EITB full-HD OBvan Direct Buy:- https://www.altairaudio.com/audio-selectors

    Read moreDone

  • AudioVAULT 11

    AudioVAULT 11 creates an environment that encourages talent to be creative as possible in delivering compelling content, building audience and increasing sales. AudioVAULT 11 provides the tools you need to work smarter and achieve more. Just like you, AudioVAULT 11 is focused on what goes out on the air. The all-new advanced AudioVAULT Scheduler allows complex program and content distribution tasks to be managed seamlessly intuitively and straightforwardly. AudioVAULT Anywhere delivers powerful control and simplified operations at your fingertips all from any connected device wherever and whenever you need it. Ideally suited for remote voice tracking, playlist and program management, file playback, remote broadcast, sports, and remote talent. CloudVAULT enables cloud-based shared and redundant content storage to deliver greater efficiency and disaster recovery using a reliable, scalable, and secure Microsoft® Azure platform.  Leverage content on a shared offsite platform across your cluster, group, or around the globe using proven and reliable Azure solutions. Seamless integration with Adobe® Audition digital audio editing software. Streamline production with powerful new metadata tools to simply load audio into AudioVAULT directly from Audition eliminating tedious data entry. AudioVAULT 11 is an entire suite of powerful, specialized tools designed to support you in delivering the best, the richest, content to your listeners. These modules can be put together in infinite ways, to fit any kind of programming, in any size market, from a single station to a multi-site group. Direct Buy: https://www.bdcast.com/products/studio-products/audiovault/

    Read moreDone

  • AURON

    This is AURON, the newest radio broadcast device of D&R designed for seamless integration and customization.

    AURON is built around a Master module (Master section) paired with a 10-channel fader unit.

    Direct BuyDone

  • Automotive Oscilloscope – SATO Series

    Automotive Oscilloscope SATO Series Bandwidth：100MHz-200MHz Sampling Rate：1GSa/s Memory Depth：70Mpts Analog Channels：2/4 Display：8 inches, 800*600 Unparalleled Operating Experience 8-inch TFT-LCD capacitive touch screen with 800 * 600 resolution, interagtes a new generation of hardware & software technologies Professional Performance High bandwidth, High sampling rate, Large memory depth, excellent signal capture performance   Portable & Benchtop Built-in 7500mAh Li-ion battery support 5h long field work; Power-off lock secure safety to carry and store; Triangle link rear stand make sure it sits on the bench solidly Charging / Start Circuit Tests Support 12V & 24V charging/start, Charging Ripple, Cranking Current and other tests   Various Sensor Tests Supports testing of ABS, Accelerator Pedal, Throttle Position, Fuel Pressure, Air Flow meter, Crankshaft, Camshaft, Knock, MAP, etc.   Actuators One-press to get signals, Fast and Easy. Support various Actuator tests: multiple fuel injector voltages and currents, fan control signals, variable valve timing, carbon canister solenoid valves, EGR solenoid valves, etc.   Ignition Including Primary ignition, Secondary ignition, and combined Primary+Secondary ignition tests.   Network CAN (CAN High / CAN Low), CAN FD, LIN, FlexRay, and K line   Combination Tests Multiple channels of oscilloscope can be measured together to perform a variety of combined tests, such as the combined test of the Crankshaft and the Camshaft, or the combined test of the Primary Ignition and the Fuel Injector Voltage, etc.   Multi-function Button Panel Highly integrated multifunctional buttons, innovative 5-Way navigation sticks, deliver quick & accurate control to various operations.   Upgraded 32GB Internal Storage Allow users to store and access mass files, such as Waveforms, Screenshots and Recorded Videos.   Smart Connections PC software + Mobile phone App (Android / iOS) remote control via Wi-Fi, USB; Able to access internet for online upgrade; Can be projected via HDMI port for demonstrations for training and education purpose. Key Specifications Model SATO1004 SATO2002 Bandwidth 100MHz 200MHz Analog channels 4 2 Rise Time ≤3.5ns ≤1.75ns Real-time sampling rate 1GSa/s 1GSa/s Memory depth 70Mpts 70Mpts Max. waveform capture rate 130,000 wfms/s Vertical Resolution 8bit Support Test Charging/Start Circuits, Sensors, Actuators, Ignition, Networks (CAN L/H, CAN FD, LIN, Flexray, K line),Combination Tests Bandwidth Filter Full bandwidth, Low pass Interfaces Wi-Fi、USB 3.0/2.0 Host、USB Type-C、HDMI、Trigger out Display 8″ TFT LCD capacitive touch screen, 800*600 pixels, 14*10 grids Dimension / Net Weight 265*192*50mm/1.9kg (with battery)

    Direct BuyDone

  • Cat-5E FTP LSZH 15M Black

    $25.31

    High Quality patch cable for AXUM and AXITE mixing consoles

    Add to cartDone