Showing 28–36 of 70 results

  • Cat-5E FTP LSZH 20M Black

    $33.75

    High Quality patch cable for AXUM and AXITE mixing consoles

    Add to cartDone

  • Exstreamer 500

    Professional Multiprotocol IP Audio de-/encoder with I/O, balanced audio. Support of Internet Radio and VoIP (SIP, RTP) codecs and protocols make the products the ideal choice for broadcast, professional and VoIP applications. More Information: https://www.barix.com/product/exstreamer-500/

    ContactDone

  • Exstreamer MPA400

    The Exstreamer MPA400 feeds 2 – 8 ohm speakers and turns them into an extensive Audio over IP system. A wide variety of audio environments, such as Dante ®, SIP, InformaCast and Syn-Apps are supported. The codec supports PCM, AACplus, MP3, OPUS, G.711, G.722 that can be served over HTTP and RTP protocols. Audio files can be stored on the internal memory and their playback can be triggered via a simple UDP command. The MPA400 is an easily-installed solid metal device. All PoE standards are supported (up to 4PPoE) to feed the built-in 40W full digital class-D audio amplifier meeting different speaker requirements. If PoE is not an option, an external power supply can be deployed too. The device offers a modern and user-friendly web interface for its configuration. REST API to interface with third party applications is also available. More Information: https://www.barix.com/product/exstreamer-mpa400/

    ContactDone

  • FM & HD Radio Modulation Monitor

    Features Monitor off-air analog FM and HD Radio signals (HD1-HD8) remotely via any Web enabled device. Spectrum graphs include RF Baseband, MPX and Left/Right Audio. O-Scope views for MPX, Pilot, RDS and all Audio Channels. The 552 collects a history of signal parameters and displays HD Radio™ album artwork, station logos and similar visuals via remote Web interface. Measures real-time audio diversity delay between the FM and HD1 broadcast. Fulltime off-air program audio is available simultaneously as L/R-analog, AES3-digital and Dante®-based AES67 AoIP streaming, all with adjustable levels, plus a multi-listener Internet IP stream and front-panel headphone jack. StationRotation enables the user to monitor up to 30 different Station Presets. Specifications Tuning Range 87.5MHz-107.9MHz in 100kHz steps Antenna Input: 75-ohm (F) High Level RF Input: 50-ohm (BNC) Sensitivity/SNR: 10dBuV required for 50dB mono-FM SNR, unweighted. Reception Modes: FM: Stereo / Forced Mono HD Radio: HD1 through HD8 FM/HD1: ‘Split Mode’ delivers L+R FM to the left audio channel and L+R HD1 to the right. Off-Air Frequency Response: FM: ±.1dB, 20Hz-15kHz HD Radio: ±0.25dB, 20Hz-20kHz Stereo Separation: FM: 60dB, 20Hz-15kHz HD Radio: 90dB, 20Hz-20kHz Distortion: FM: <0.01% THD, 20Hz-15kHz HD Radio: <0.003% THD, 20Hz-20kHz FM De-emphasis: 75µs, 50µs or None, menu-selectable Program Audio Outputs: ‘Assignable’ outputs utilizing XLR connectors. Balanced Analog: Left and Right outputs adjustable from –15dBu to +15dBu in 0.1dB steps; 200Ω source. AES Digital: Adjustable from –30dBFS to 0dBFS in 0.1dB steps; 44.1kHz sample rate; 110 Ω transformer-coupled. Dante/AES67 Compatible: (RJ45) Output at 44.1kHz (Dante-only) or 44.1kHz/ 48kHz (Dante /AES67); AoIP utility has independent IP, Audio Format and Transmit Flow settings; level adjustable from –30dBFS to 0dBFS in 0.1dB steps. Headphone Jack: (¼” TRS) with adjustable listening level. Listening Stream: Web browser ‘remote listening’ stream uses HE-AACv2 encoding, 44.1kHz or 48kHz sample rate, bit-rates from 18kbps to 64kbps; accommodates up to 10 simultaneous listeners. HTTP/Icecast and raw UDP streams are available simultaneously. Composite/MPX Output: (BNC) may be switched between MPX and 19kHz stereo pilot sample; adjustable from 1Vpp to 6Vpp in 0.05V steps. LAN Port: LAN connection to local network or Internet provides remote monitoring, control, listening and full SNMP implementation; user-programmable network setup and streaming parameters. General Purpose Outputs: Ten individual open-collector NPN transistor closures to ground are associated with alarm functions. Each is programmable for GPO assignment and logic polarity. RDS Fields Displayed ## (Web only): PS • PI • Call • RT • RT+1 • RT+2 • PTY • PTYN • CT • M/S • DI • TP • TA • AF • ODA • Block Error Rate • Groups & use statistics. HD PAD Data Displayed ## (Web only): Overview: Short Name • Universal Name • Station ID • Slogan• Message • Station Location • Service Mode • TX Blend • Emergency Alert HD1-HD8, each: Slogan • Program Type • Artist • Title • Album • Codec Mode • Bitrate • TX Gain • Logo/Artist Experience graphics and file details. Bargraph & Numerical Level Metering: Analog FM: Carrier Modulation • Stereo Pilot & Subcarriers • Demodulated L/R & L+R/L-R • Stereo Separation • Stereo Crosstalk • BS.1770 Loudness • Synchronous & AM Noise. HD Radio: (simultaneously for HD1 and three other preselected HD programs) L/R Audio • BS.1770 Loudness (absolute and relative to Analog FM Loudness). FM/HD1 Alignment: Timing offset and level and phase discrepancies between programs; ‘Confidence Factor’ display. Graphic Displays/Plots ## (Web only): RF Spectrum • MPX Spectrum • Audio Spec­trum • Audio XY • Audio O’scope • FM Modulation History • Audio Level History • Metrics History • FM/HD1 Time & Level Alignment History • BandScanner™ utility. Alarms: Most alarms have multiple parameter settings. All alarms can send text or email notifications. Alarms are also logged: daily, weekly, monthly._ Analog FM: Carrier Overmod • Audio Loss • Low Signal • RDS Loss • PI Error • RT Update • Pilot Loss HD Radio: HD Loss • Program Loss • Audio Loss • HD Power Level • FM/HD1 Alignment • PSD Update • Logo Receipt • Artist Experience Update • Image Issues • Emergency Alert Updates Real-Time Clock: Auto-sets to Internet time; auto/manual DST setting; battery backup. Power Requirement: 88-264Vac, 18W. Operating Environment: 32°F/0°C-122°F/50°C; 0%-95% non-condensing relative humidity; 10,000ft/3048m Size and Weight: 25”H x 17”W x 3”D; 8 lbs. shipping weight. Direct Buy:- https://www.inovonicsbroadcast.com/product/552

    Read moreDone

  • FM Modulation Monitor

    Features Unexcelled off-air reception of analog-FM broadcasts with highly-accurate displays of total modulation and other measurements, even in the presence of on-channel or adjacent-channel HD Radio carriers at any level. Intuitive, menu-driven setup from the front panel, or remote setup and operation with the built-in Webserver that may be addressed over any IP network by computer or mobile device. The 541 supports full SNMP remote control and monitoring. Graphic front-panel and remote display of all level metering; FFT spectrum analysis of IF passband, MPX baseband and program audio; oscilloscope display of program audio and stereo XY. Alarms for a range of signal faults, with tallies and SMS/text or email message dispatches to specific individuals for various alarm conditions. All alarms are logged chronologically as well. Analog, AES3-digital, HTTP/UDP Web-streaming and independent AoIP-streaming program audio outputs, plus an FM composite/MPX baseband output. The BandScanner™ utility scans the FM spectrum and displays each station with its signal level, PI code and call sign. StationRotation™ mode enables automatic sequential monitoring of multiple station presets. Collects and logs a history-over-time of FM and audio signal parameters. Accurate program loudness measurement to the human perception ITU-R BS.1770 (‘LU’) loudness specification. Stays on-channel and retains measurement setups through signal and power losses. Specifications PLEASE NOTE: Specifications tabulated here are actual, real-world measurements, not optimistic allusions to theoretical ideals. Measurement results should be repeatable when using the appropriate, laboratory-grade test equipment. RF & RECEPTION: Tuning Range: Tunes 76.0MHz-108.0MHz in 100kHz steps. Antenna Input: 75-ohm (F), 1VRMS max. High-Level RF Input: 50-ohm (BNC), 5VRMS max. Off-Air Sensitivity (for 50dB monaural SNR): 5dBµV or better with de-emphasis. 15dBµV or better unweighted. Reception Modes: Stereo / Forced Mono / SCA Program Audio FM BASEBAND (Off-Air or High Level; (D) indicates measurements taken with de-emphasis.) Frequency Response: ±0.25dB, 10Hz-100kHz. Signal-to-Noise (D): >83dB. Distortion (D): <0.01% THD+N; <0.01% IMD (SMPTE, 60Hz/7kHz, 4:1). FM Deviation: Indicates composite (total) and independent positive and negative deviations. ±75kHz = 100% Modulation; 0-200% metering with ±1% accuracy. *AM Noise (D): Measures down to 87dB below 100% AM Modulation. FM Stereo Pilot: Indicates 0-15% pilot injection; pilot frequency readout has ±0.1Hz accuracy. FM Subcarriers: Indicates percent injection of 38kHz (residual), 57kHz RDS, 67kHz/92kHz SCA subcarriers. FM AUDIO PERFORMANCE (Off-Air or High Level; taken with de-emphasis; (M) indicates measurements taken in monaural reception mode.) Frequency Response: ±0.1dB, 20Hz-15kHz. Signal-to-Noise (M): Analog Out: <0.01% THD+N; <0.02% IMD (SMPTE, 60Hz/7kHz, 4:1). Digital Out: <0.01% THD+N; <0.01% IMD (SMPTE, 60Hz/7kHz, 4:1). Stereo Separation: >64dB, 20Hz-15kHz FM Stereo Crosstalk (Main-Sub or Sub-Main): >67dB, 20Hz-15kHz,. FM De-emphasis: 75µs / 50µs / None. INPUTS, OUTPUTS AND PORTS: MPX Output: (BNC) select either MPX or 19kHz stereo pilot sample; adjustable from 1VPP to 6VPP in 0.01V steps; ±0.25dB, 10Hz-100kHz. Program Audio Outputs: May be assigned to the FM-stereo program or to SCA audio. Unless otherwise noted, performance parameters reflect FM Stereo Performance cited above. Balanced Analog: (XLR) Left and Right outputs adjustable from –15dBu to +15dBu in 0.1dB steps; 200Ω resistive source. AES Digital: (XLR) Adjustable from –30dBFS to 0dBFS in 0.1dB steps; user-selected 44.1kHz or 48kHz sample rate; 110Ω transformer-coupled. Dante/AES67 Compatible AoIP Port: (RJ45) Output at 44.1kHz (Dante-only) or 44.1kHz/48kHz (Dante/AES67); AoIP utility has independent IP, Audio Format and Transmit Flow settings; level adjustable from –30dBFS to 0dBFS in 0.1dB steps. Program Audio Outputs (continued): UDP Stream: ADTS or ADTS in MPEG-TS transport. HTTP/Icecast ‘Casual’ Listening Stream: Web browser remote-listening stream employs HE-AACv2 encoding, 44.1kHz or 48kHz sample rate, bit-rates from 18kbps to 64kbps; accommodates up to 10 simultaneous listeners. HTTP/Icecast and raw UDP streams are available simultaneously. Headphone Jack: (¼” TRS) Menu-adjustable listening level. LAN Port: (RJ45) LAN connection to local network or Internet provides remote monitoring, control, listening and full SNMP implementation; user-programmable network setup and streaming parameters. LAN Port: (RJ45) LAN connection to local network or Internet provides remote monitoring, control, listening and full SNMP implementation; user-programmable network setup and streaming parameters. DISPLAYS AND DISPLAY OPTIONS: Bargraph & Numerical Level Metering: Carrier Modulation • Stereo Pilot & Subcarriers. MPX Power • Demodulated L/R & L+R/L-R Stereo Separation • Stereo Crosstalk • BS.1770 Loudness • SCA Levels • Synchronous & AM Noise. Graphic Displays and History Plots: IF Spectrum • MPX Spectrum • Audio Spectrum • Audio Oscilloscope • Audio XY • FM Modulation History. Audio Level History • RF Metrics History. BandScanner™ utility. RDS Fields Displayed: PS • PI • Call • RT • RT+1 • RT+2 • PTY • PTYN • CT • M/S • DI • TP • TA • AF • ODA • Block Error Rate • Groups & Group Use Statistics. TIMEKEEPING AND ALARMS: Real-Time Clock: Auto-sets to Internet time; auto/manual DST setting; battery backup. Local & Remote Alarms: Carrier Overmod • MPX Power • Audio Loss • Low Signal • Pilot Loss • Multipath • RDS Loss • RDS PI Error • RDS RT RDS CT • RDS TMC • Pilot Loss • MPX Power. (Most alarms have multiple parameter settings. All alarms can send text or email notifications. Alarms are automatically logged daily, weekly and monthly.) POWER, ENVIRONMENTAL, MISCELLANEOUS Power Requirements 88-264VAC, Single-Phase; 12W. Size and Weight 3.5”H x 19”W x 9”D (2U); 10 lbs. (shipping weight) Operating Environmental 32°F/0°C-122°F/50°C; 0%-95% non-condensing relative humidity; 10,000ft/3048m. Conformances CE: EN50081-1 / EN50082-1, 93/68/EEC RoHS: 2002/95/EC. Direct Buy:- https://www.inovonicsbroadcast.com/product/541

    Read moreDone

  • GEN 4 Tablet Oscilloscope – TO Series

    GEN 4 Tablet Oscilloscope TO Series Bandwidth：100MHz-300MHz Sampling Rate：2GSa/s Memory Depth：220Mpts Analog Channels：2/4 Display：10.1 inches, 1280*800 Full Touch Operation The new TO series oscilloscope provides full touch operation, with upgraded UI, it’s much more efficient to use than traditional desktop oscilloscopes 10.1 Inch TFT-LCD Display Ultra-high 1280*800 resolution plus seamless capacitive screen provides unmatched touch experience, compact design leading in portable solution Complete Connectivity Equipped with Wi-Fi, USB 3.0/2.0 Host, USB Type-C, Grounding, HDMI, and Trigger Out interfaces Portable & Benchtop Built-in 7500mAh Li-ion battery support 4/5h long field work, Power-off lock secure safety to carry and store; Triangle back stand make sure it sits on the bench solidly as well. Deep 220Mpts Memory Depth Using hardware-based Zoom technology and max 220Mpts memory depth, users can capture signals at longer time periods at higher resollution, and to see more details Max300,000 wfms/s waveform capture rate, the TO series can easily capture unusual or low-probability events. Powerful Trigger Functions Support Edge, Pulse, Runt, Logic, N-edge, Video, Timeout, Slope etc. Serial Bus Decoding Function (Standard) Support UART、CAN、LIN、SPI、I2C, also able to output the decoded data in Text mode or to CSV format   Key Specifications Model TO3004 TO2004 TO2002 TO1004 Bandwidth 300MHz 200MHz 200MHz 100MHz Rise Time ≤1.16ns ≤1.75ns ≤1.75ns ≤3.5ns Analog channels 4 4 2 4 Real-time sampling rate 2GSa/s 2GSa/s 1GSa/s 1GSa/s Memory Depth 220Mpts 220Mpts 110Mpts 110Mpts Max. waveform capture rate 300,000 wfms/s 300,000 wfms/s 78,000 wfms/s 78,000 wfms/s Input sensitivity range 1mV/div ~ 10V/div (1MΩ)；1mV/div ~ 1V/div (50Ω) 1mV/div ~ 10V/div Bandwidth Filter 20MHz, High Pass / Low Pass (to 30Hz) 20MHz, High Pass / Low Pass (to 30kHz) Segmented Storage Support，capture max 10,000 waveform events Not Support Input impedance 1MΩ/50Ω 1MΩ Timebase range 1ns/div ~ 1ks/div 2ns/div ~ 1ks/div Vertical Resolution 8bit Trigger types Edge, Pulse Width, Logic, Nth Edge, Runt, Slope, Time Out, Video Bus decoding RS-232/422/485/UART, CAN, CAN FD, LIN, SPI, I²C Interfaces Wi-Fi, USB 3.0/2.0 Host, USB Type-C, Grounding, HDMI, Trigger out Storage 32G Display 10.1 Inch LCD capacitive touch display，1280*800 resolution，11*10 grids Battery 7.4V, 7500mAh Li-Ion battery Dimension / Net Weight 265*192*50mm / 1.9kg（with battery） Direct buy:- https://www.micsig.com/product6/

    Direct BuyDone

  • GEN 6 High Resolution Tablet Oscilloscope MHO1 Series

    GEN 6 High Resolution Tablet Oscilloscope MHO1 Series Bandwidth：200MHz Sampling Rate：1GSa/s Memory Depth：110Mpts Analog Channels：4 Display：8 inches, 1280*800 Battery：3.7V 16000mAh Micsig MHO1 series is an ultra-portable professional-grade high-resolution oscilloscope, equipped with a 12-bit high-precision ADC, featuring a bandwidth of up to 200MHz, 4 analog channels, a real-time sampling rate of 1GSa/s, and a storage depth of 110Mpts. These high-performance parameters ensure that every measurement is accurate and provides a solid foundation for in-depth signal analysis. With a body thickness of only 3.1 cm, it can be easily placed in a backpack for efficient testing anytime, anywhere. It is equipped with an 8-inch high-definition anti-glare touch screen with a resolution of up to 1280*800, offering a delicate and clear picture and responsive touch, bringing users an ultimate operating experience. Ultra-thin 3.1cm Body The MHO1 series has a body thickness of only 3.1cm, which is very compact and small, easily fitting into your backpack for efficient testing anytime, anywhere.   Integrated Multimeter Function The MHO1 series oscilloscope innovatively incorporates a 4½-digit multimeter function, supporting a variety of measurements including voltage, current, resistance, continuity testing, diode testing, and capacitance measurement. There’s no need to carry an additional multimeter, as it can meet a diverse range of testing requirements. Furthermore, the system supports simultaneous operation of the oscilloscope and multimeter with seamless switching, greatly enhancing on-site work efficiency and convenience.   Built-in Battery for Ultimate Portability Despite its ultra-thin design, the MHO1 series features a soft rubber protective casing that not only offers a comfortable grip but also excellent protective capabilities. Equipped with a 16000mAh high-capacity, long-life lithium-ion battery, it can withstand over 1000 charge-discharge cycles and continue working for up to 4 hours without an external power source. Additionally, it supports charging via power banks, completely eliminating worries about battery life and making testing work more worry-free.   12-Bit Vertical Resolution The MHO1 series utilizes a 12-bit high-resolution ADC, offering up to 4096 quantization levels, which is 16 times that of a traditional 8-bit ADC. This allows users to observe waveform details more completely and clearly.   User-Friendly UI for Quick Start Three Operation Modes: Fully Touchscreen, Physical Buttons and Knobs, and Hybrid Operation; Equipped with the SigTest UI, a Specialized Instrument System Evolved from Thousands of Engineer User Suggestions, All Operations Can Be Completed Swiftly, Simplifying Complex Tasks.   Deep Storage, Standard Segmented Storage Standard segmented storage divides limited storage space into multiple small segments, gathering multiple trigger events within a single storage space. With convenient analysis and viewing functions, it allows for both integrated and individual display, making analysis and positioning more accurate and efficient, turning “finding a needle in a haystack” into a possibility. Direct Buy:- https://www.micsig.com/MHO1/

    Direct BuyDone

  • GTX / GRX Series

    The GTX / GRX is a modern direct-synthesis, frequency-agile Studio to Transmitter Link (STL) with a wide frequency range spanning from VHF to SHF. Both transmitter and receiver offer full digital readout with a simple and intuitive front panel jog wheel, coupled with extensive RS232-based programmability and monitoring. A web-based UI is also available.

    Direct BuyDone

  • High Resolution Oscilloscope – MHO 3 Series

    High Resolution Oscilloscope MHO 3 Series Bandwidth：250MHz-500MHz Sampling Rate：3GSa/s Memory Depth：360Mpts Analog Channels：4 Display：14 inches, 1920*1200   High Resolution Oscilloscope MHO 3 Series has 500MHz bandwidth, 3GSa/s sampling rate, 4 analog channels, 360Mpts memory depth and 12 bits vertical resolution; 3.58cm ultra-thin body support wall  /arm mounting; 14-inch integrated touch screen with resolution of 1920 x 1200 brings unmatched waveform display.       12-bit Vertical Resolution MHO 3 series has 12-bit high-resolution ADC with a quantization level of up to 4096, which is 16 times that of traditional 8-bit ADC, helping users to observe waveform details more comprehensively and clearly.   Most friendly UI Equipped with instrument-dedicated SigTestUI™ operating system, and accumulation of 10 years of UI design experience, the MHO 3 series evolved to simplify all user interfaces, newer engineers can quickly learn to use in 5 minutes. Complete connectivity Original Mic-OPI™ probe interface, automatically identifies passive probe attenuation, one-click to proceed auto-calibration; standard with BNC adapter, also has USB 3.0 Host, USB Type-C, LAN, HDMI, Trigger out etc.   Low noise floor The noise of MHO 3 series is less than 80μVrms under 500MHz full bandwidth, allow engineers accurately capture weak but important signals during daily circuit debugging.   Deep memory and segmented storage acquisition Up to 360Mpts memory depth delivers excellent signal fidelity, segmented storage divides the limited storage space into multiple small segments, and collects multiple trigger events into one storage space, effectively captures target signals multiple times over a long period of time and play back for further analysis.   Hardware digital filter Hardware digital filtering can selectively pass or block signal components within a specific frequency range, very useful for analyzing specific frequency bands of a signal or observing changes in specific frequency components.   Comprehensive selection of probes In addition to the standard passive probes, the MHO 3 series supports connection to all Micsig probes: optical-fiber isolated probe, high-voltage differential probes, and AC/DC current probes, such combination can maximize the performance of the probe and oscilloscope.     Key Specifications Model MHO3-5004 MHO3-3504 MHO3-2504 Bandwidth 500MHz 350MHz 250MHz Rise Time ≤0.7ns ≤1ns ≤1.4ns Analog channels 4 4 4 Real-time sampling rate 3GSa/s 3GSa/s 3GSa/s Memory Depth 360Mpts 360Mpts 360Mpts Vertical Resolution 12bit Max. waveform capture rate 230,000wfms/s Noise ＜80μVrms Interfaces USB 3.0 Host、USB Type-C、HDMI、Trigger out Display 14″ full touch display, 1920 x 1200 resolution Dimension / Net Weight 400*280*35.8mm / 4.3kg Direct buy:- https://www.micsig.com/MHO/

    Direct BuyDone