View cart “8 channel SDI and HDMI Clear CATV RF Modulator” has been added to your cart.
Showing 1–9 of 70 results
-
This a terrific solution for taking in up to 16 HD HDMI signals from any source and modulate them into any agile analog channels. Simple and easy way to distribute high definition signals to legacy TV distribution systems. Comes equipped with a pre-programmed channel list and its ability to setup any of those channels anywhere in the spectrum, operators can set up the modulator quickly and efficiently. This is particularly a unique modulator because most Analog Modulators on the market require CVBS input, in most cases the HDMI sources would need to be converted externally to CVBS. Our device is doing it for you so you could use any SD/HD HDMI source, which then converts it internally to baseband video then modulates it to the Analog channels of your choosing. This modulator is HDCP compliant and works with any HDMI sources and also comes with a network port for NMS, ethernet connection allows for remote access and management system. Features Converts 16 independent HD/SD HDMI video and audio signals to analog NTSC or PAL / SECAM channels Rack-mountable 1RU for easy insertion into any headend High picture quality thanks to the 16 HDMI inputs Internal fans – self-cooling system for long life span HDMI is HDCP compliant High power +50dBmv 16 Agile channels ouput NMS network GUI for management via RJ45 port Model Selection H-16HDMI-RF-AMOD – 16 HDMI Inputs – 16 Analog RF Out (NTSC) H-16HDMI-RF-AMOD-PAL – 16 HDMI Inputs – 16 Analog RF Out (PAL) Similar model but with CVBS (baseband Video Audio -RCA) inputs: H-16RCA-RF-AMOD – 16ch RCA CVBS Analog Baseband Video / Audio to 16 CATV RF NTSC Agile modulator H-16RCA-RF-AMOD-PAL – 16ch RCA CVBS Analog Baseband Video / Audio to 16 CATV RF PAL Agile modulator Direct Buy:- https://thorbroadcast.com/product/16-hdmi-to-analog-agile-catv-rf-modulator-ntsc-8230-3.html
-
Features Monitor off-air analog FM and HD Radio signals (HD1-HD8) on the Hi-Res Front Panel Touch Display and via the Web from anywhere in the world. The 3U package features a 7-inch graphic touch screen display, wide-range LED level meters with rear-panel tallies. The 551 collects the history of signal parameters and displays HD Radio™ album artwork, station logos and similar visuals on the front panel display and remote Web interface. Front-panel alarms and/or rear-panel ‘tallies’ indicate Audio Loss, Low Signal, RDS Errors, HD Loss, HD Power, FM/HD1 Alignment, HD Artist Experience, and many others. Spectrum graphs include RF Baseband, MPX and Left/Right Audio. O-Scope views for MPX, Pilot, RDS and all Audio Channels. Measures real-time audio diversity delay between the FM and HD1 broadcast. Fulltime off-air program audio is available simultaneously as L/R-analog, AES3-digital and Dante®-based AES67 AoIP streaming, all with adjustable levels, plus a multi-listener Internet IP stream and front-panel headphone jack. Specifications Tuning Range 87.5MHz-107.9MHz in 100kHz steps Antenna Input: 75-ohm (F) High Level RF Input:50-ohm (BNC) Sensitivity/SNR:10dBuV required for 50dB mono-FM SNR, unweighted. Reception Modes: FM: Stereo / Forced Mono HD Radio: HD1 through HD8 FM/HD1: ‘Split Mode’ delivers L+R FM to the left audio channel and L+R HD1 to the right. Off-Air Frequency Response: FM: ±.1dB, 20Hz-15kHz HD Radio: ±0.25dB, 20Hz-20kHz Stereo Separation: FM: 60dB, 20Hz-15kHz HD Radio: 90dB, 20Hz-20kHz Distortion: FM: <0.01% THD, 20Hz-15kHz HD Radio: <0.003% THD, 20Hz-20kHz FM De-emphasis: 75µs, 50µs or None, menu-selectable Program Audio Outputs: ‘Assignable’ outputs utilize XLR connectors, ‘Dedicated’ outputs are RJ45 jacks per StudioHub® spec. (model 551 only) Balanced Analog: Left and Right outputs adjustable from –15dBu to +15dBu in 0.1dB steps; 200Ω source. AES Digital: Adjustable from –30dBFS to 0dBFS in 0.1dB steps; 44.1kHz sample rate; 110 Ω transformer-coupled. Dante/AES67 Compatible: (RJ45) Output at 44.1kHz (Dante-only) or 44.1kHz/ 48kHz (Dante /AES67); AoIP utility has independent IP, Audio Format and Transmit Flow settings; level adjustable from –30dBFS to 0dBFS in 0.1dB steps. Headphone Jack: (¼” TRS) with adjustable listening level. Listening Stream: Web browser ‘remote listening’ stream uses HE-AACv2 encoding, 44.1kHz or 48kHz sample rate, bit-rates from 18kbps to 64kbps; accommodates up to 10 simultaneous listeners. HTTP/Icecast and raw UDP streams are available simultaneously. Composite/MPX Output: (BNC) may be switched between MPX and 19kHz stereo pilot sample; adjustable from 1Vpp to 6Vpp in 0.05V steps. LAN Port: LAN connection to local network or Internet provides remote monitoring, control, listening and full SNMP implementation; user-programmable network setup and streaming parameters. General Purpose Outputs: Ten individual open-collector NPN transistor closures to ground are associated with alarm functions. Each is programmable for GPO assignment and logic polarity. RDS Fields Displayed: PS • PI • Call • RT • RT+1 • RT+2 • PTY • PTYN • CT • M/S • DI • TP • TA • AF • ODA • Block Error Rate • Groups & use statistics. HD PAD Data Displayed: Overview: Short Name • Universal Name • Station ID • Slogan• Message • Station Location • Service Mode • TX Blend • Emergency Alert HD1-HD8, each: Slogan • Program Type • Artist • Title • Album • Codec Mode • Bitrate • TX Gain • Logo/Artist Experience graphics and file details. Bargraph & Numerical Level Metering: Analog FM: Carrier Modulation • Stereo Pilot & Subcarriers • Demodulated L/R & L+R/L-R • Stereo Separation • Stereo Crosstalk • BS.1770 Loudness • Synchronous & AM Noise. HD Radio: (simultaneously for HD1 and three other preselected HD programs) L/R Audio • BS.1770 Loudness (absolute and relative to Analog FM Loudness). FM/HD1 Alignment: Timing offset and level and phase discrepancies between programs; ‘Confidence Factor’ display. Graphic Displays/Plots: RF Spectrum • MPX Spectrum • Audio Spectrum • Audio XY • Audio O’scope • FM Modulation History • Audio Level History • Metrics History • FM/HD1 Time & Level Alignment History • BandScanner™ utility. Alarms: Most alarms have multiple parameter settings. All alarms can send text or email notifications. Alarms are also logged: daily, weekly, monthly._ Analog FM: Carrier Overmod • Audio Loss • Low Signal • RDS Loss • PI Error • RT Update • Pilot Loss HD Radio: HD Loss • Program Loss • Audio Loss • HD Power Level • FM/HD1 Alignment • PSD Update • Logo Receipt • Artist Experience Update • Image Issues • Emergency Alert Updates Real-Time Clock: Auto-sets to Internet time; auto/manual DST setting; battery backup. Power Requirement: 88-264Vac, 18W. Operating Environment: 32°F/0°C-122°F/50°C; 0%-95% non-condensing relative humidity; 10,000ft/3048m Size and Weight: 25”H x 17”W x 3”D; 8 lbs. shipping weight.
-
$4,495.00
Thor SDI Modulator is the Hybrid to choose. This is the most versatile SDI & HDMI unit form Thor This unit provides up to 8 SDI or HDMI inputs you can select either in the options menu or on the simple and creative GUI. This Thor modulator has independent input cards for flexibility for Digital Modulation because it eliminates the need for SDI to HDMI or HDMI to SDI converters. Simply select which source you want to use and input the channel frequency creating an automated encoding headend device that can clean up your headend and modulation distribution infrastructure. Each channel can individually be selected as an SDI or HDMI input, it could be switched on the fly using front panel buttons or Thor’s dynamic proprietary Web interface. Each of the 8 channels of RF output can be set totally independent as a frequency AND modulation standard. For example, you can input 4 channels of SDI and set to ATSC output and then input 4 channels of HDMI and set to QAM. This is a flexibility that hasn’t been seen before on the market creating a whole new generation of standard for encoder modulation products. The New THOR HYBRID Modulator has an NMS port and LCD display with simple D-Pad buttons for control and easy setup on the fly. It includes and supports the majority of Modulation standards found in the world; like Clear QAM Annex A and Annex B, ATSC-8VSB, DVB-T, and ISDB-T. The Hybrid modulator support MPEG2 video encoding up to 25Mbps/channel, Audio AC3 or MPEG1 Layer 2, and AAC, Thor’s world-famous Low Latency, and VCT -Virtual Channel Numbers for increased flexibility. Each CATV RF channel can be set individually, so it does not have to be in a linear 8ch block, feel free to spread out your new custom RF channels all over the existing RF spectrum in your modulation lineup. Features 8 Independent SDI and HDMI Inputs – (individually selectable for each of the 8 channels you can output) HDMI is HDCP compliant for use with any source SDI Inputs include support for Closed Caption 708 Outputs 8 separate Clear CATV RF channels QAM / ATSC – 8VSB / DVB-T / ISDB-T (selectable in the GUI) RF output on each of the 8 RF channels can be individually set to a frequency and modulation standard (2 on QAM, 3 on ATSC, 4 on ISDBT, etc) DVB-C Annex A and B – QAM 64, QAM 256 Supports full HD video up to 1080p/59.94/60, other resolutions included are 1080i, 720p, 480i also supported Low Latency supported; 2 different latency settings – 500/1000ms Video encoding rate up to 25Mbps MPEG2 Video Encoding Dolby AC3 and MPEG1 Layer 2, & AAC audio encoding VCT – Virtual channel number and Name supported Frequency – 50Mhz to 900Mhz NMS web interface controllable Easy to use web Gui Interface (setup and status) LED’s Status on front panel shows HDMI in blue or SDI in green for easy to see video detect link LCD Display and front panel control buttons for setup, control and status Powerful processing with the best MPEG2 video encoding chip First High Density HDMI and SDI input modulator on the market Lowest cost per channel in perfect HD resolution for any application from Live Sports, House of Worship, Concerts, Theatres, Malls, Airports, Hotels, Military, Private Enterprise Direct Buy: https://thorbroadcast.com/product/8-channel-sdi-and-hdmi-clear-catv-rf-modulator-qam-8230.html#
-
8CH High Resolution Oscilloscope MHO 6 Series Bandwidth：350MHz-1GHz Sampling Rate：6GSa/s Memory Depth：1800Mpts Analog Channels：8 Display：16 inches, 1920*1200 The MHO high-resolution oscilloscope 6 series features a 1GHz bandwidth, 6GSa/s sampling rate, 8 analog channels, a storage depth of 1800 million points (Mpts), and a 12-bit vertical resolution. Its high bandwidth and 8-channel capability are suitable for faster circuit analysis and more synchronized signal testing. Its ultra-thin design of 3.52 cm can save a lot of your precious desk space; a 16-inch touch screen with a resolution of 1920*1200 provides you with a super clear waveform display for a more comfortable visual experience. Outstanding Performance Precise Insight The MHO 6 series oscilloscopes utilize high-precision 12-bit high-speed ADC technology with a sampling rate up to 6Gsa/s. Combined with meticulous circuit design and advanced signal processing techniques, they achieve comprehensive capture and stable analysis of signals ranging from weak to high-speed, providing solid assurance for high-precision testing in fields such as scientific research, production, and education. Their maximum analog bandwidth reaches 1GHz, easily meeting the testing challenges of the most cutting-edge devices in the field of power electronics. Multi-Channel Parallelism Efficiency Upgraded Equipped with 8 independent analog channels, the MHO 6 series oscilloscopes enable engineers to simultaneously observe and analyze up to 8 test points, greatly enhancing testing efficiency and accuracy. This provides strong support for timing analysis, troubleshooting, and performance optimization of complex systems. Outstanding Display Featuring a 16-inch high-definition touch screen with a resolution of up to 1920*1200, it delivers a delicate and clear visual experience. The ultra-thin body design, with a thickness of only 3.52cm, is both portable and aesthetically pleasing, making every operation a pleasure. Complete connectivity Original Mic-OPI™ probe interface, automatically identifies passive probe attenuation, one-click to proceed auto-calibration; standard with BNC adapter； also has USB 3.0 Host, USB Type-C, LAN, HDMI etc. Comprehensive selection of probes ased on Micsig’s comprehensive probe product line, the MHO6 series oscilloscopes can be paired with SigOFIT Optical-fiber Isolated Probe, high-voltage differential probes, Rogowski coils, and high-frequency AC/DC current probes, among others. Each of these probes has its own unique features, capable of flexibly adapting to various testing scenarios, providing a complete and reliable solution for power electronics testing. Key Specifications Model MHO68-1000 MHO68-500 MHO68-350 Bandwidth 1GHz 500MHz 350MHz Rise Time ≤0.4ns ≤0.7ns ≤1ns Analog channels 8 8 8 Real-time sampling rate 6GSa/s 6GSa/s 6GSa/s Memory Depth 1800Mpts 1800Mpts 1800Mpts Vertical Resolution 12bit Input impedance 50Ω / 1MΩ Display 16″ full touch display, 1920 x 1200 resolution Dimension / Net Weight 44.3.*30.7*3.52cm / 5.7kg Direct buy:- https://www.micsig.com/MHO6/
-
ACCESS NX is an IP audio codec that’s made to go anywhere. Designed from the ground up as a platform for CrossLock, our sophisticated custom reliability layer, we’ve optimized ACCESS NX to send and receive high-quality audio over even the most marginal networks. Features AAC family and Opus encoders CrossLock for secure and stable broadcasting Switchboard for easier connectivity Two mic-line inputs Optional 4-channel mixer Two USB ports 5-inch capacitive touch screen Built-in Ethernet port Built-in battery – up to 6.5 hours of talk time (5 hours with mixer) Compatible with all Comrex ACCESS & BRIC-Link models EBU 3326/SIP mode for third-party compatibility Free firmware updates Top-notch technical support (English & Spanish) 100% designed & built in the USA at our facility in Devens, Mass. One year manufacturer’s warranty More information: https://www.comrex.com/products/access-nx-ip-audio-codec/
-
The AIRENCE is a reliable modern digitally controlled analogue On-Air console that could satisfy any serious Radio Studio that does not have the budget to go high end digital all the way. This console can do nearly anything you want in a nice compact and good looking package.
-
The AIRENCE-USB is a reliable, digitally controlled analog on-air console suitable for any serious radio studio. Its compact design, extensive features, and attractive appearance make it a versatile and practical choice for radio broadcasting needs.
-
The AIRENCE is a reliable modern digitally controlled analogue On-Air console that could satisfy any serious Radio Studio that does not have the budget to go high end digital all the way. This console can do nearly anything you want in a nice compact and good looking package.
-
Looking for an extremely reliable radio console that perfectly balances features and operational simplicity? Look no further than the Airlab-DT. Its analog, digitally controlled signal path offers the best of both worlds, ensuring reliability under any condition.
